Wellhead pressure & temperature
Continuous analog telemetry from casing and tubing sensors, trended per well and per lease, with automatic outlier filtering.
Texas oilfield telemetry
Know the status of every well, every minute.
Texas Energy streams wellhead pressure, temperature, flow and pump behaviour from the Permian, Eagle Ford and Gulf Coast fields into one operator console — so problems show up as an alarm, not as a lost day of production.
1,240+Wells monitored
< 5 sTelemetry latency
99.95%Platform uptime
24 / 7Alarm coverage
Online1,187/1,240
Alarms1
Latency3.4 s
| Well | County | Status | WHP psi | Temp °F | bbl/d | Last |
|---|---|---|---|---|---|---|
| TX-MID-0142 | Midland | Flowing | 1,842 | 143 | 412 | 4 s |
| TX-ECT-0873 | Ector | Pumping | 968 | 128 | 187 | 6 s |
| TX-AND-0219 | Andrews | High WHP | 2,410 | 156 | 0 | 3 s |
| TX-MRT-0455 | Martin | Pumping | 1,120 | 131 | 224 | 5 s |
| TX-HWD-0091 | Howard | Shut-in | 0 | 96 | 0 | 8 s |
| TX-REV-0630 | Reeves | Flowing | 2,105 | 149 | 508 | 4 s |
| TX-WNK-0117 | Winkler | Offline | — | — | — | 41 min |
| TX-PCS-0308 | Pecos | Pumping | 1,003 | 126 | 176 | 7 s |
What we monitor
One telemetry stack covers the wellhead, the pump and the facility around it — no separate systems to reconcile at month-end.
Flow rate & production allocation
Meter and virtual-flow inputs rolled up to daily and monthly volumes, reconciled against your allocation model.
Pump-off control & diagnostics
Rod load, run time and dyno-card analysis to catch pump wear, gas lock and fluid pound before the well goes down.
Tank, battery & facility levels
Tank gauges, separator pressures and battery voltages in the same view, so hauling and power issues surface early.
Alarm engine & dispatch
Per-well thresholds, hysteresis and quiet hours. Alarms route to email, SMS or your own API within seconds.
Field connectivity
4G LTE, satellite or LoRa backhaul with local store-and-forward — data resumes intact after a network drop.
From wellsite to alarm in three steps
STEP 01
Instrument
Pressure, temperature, flow and pump sensors connect to a field RTU — new wells or retrofits, no rip-and-replace of existing instrumentation.
STEP 02
Transmit
Readings move over 4G, satellite or LoRa with local buffering and TLS transport, so a dropped link never becomes a hole in the data.
STEP 03
Watch
Everything lands in the operator console and our IoT management platform, with alarms pushed to the people on call.
Put your wells on one screen
Send us a lease list and we will show you the console with your own well identifiers, counties and thresholds — usually within a week.